|
| Since its introduction in June 2004, the TNX has dominated the U.S. R/C racing truck scene
with a series of impressive wins, including Monster Madness and the Pro-Line Nitro Maxx Challenge. We
now proudly announce our next generation Ready-to-Run nitro monster truck: the TNX 5.2R
which is designed to continue this victorious trend with even greater top speeds and performance. |
|
|
|
|
The new TNX engine features a rear exhaust pipe for bursts of power, pushing this R/C Monster truck to the front of the pack with explosive acceleration and extreme top speeds. The high performance 5.2cc .32 (cubic inch) engine features a slide valve carburetor for optimum response. The New TGM-04 chassis features a 2-speed transmission for reliable shifting and ball pivot suspension equipped with 4 large capacity oil dampers for excellent handling and stability. The Ultra tough chassis frame features reinforced and heavy-duty parts built to take on all kinds of terrain. Steel drive shafts provide improved durability and excellent performance, without adding unnecessary weight. Fully-equipped weight of the new TNX is drastically reduced, weighing in at 4,300g. This is a full 100g lighter than the original TNX, and compares favorably with most 1/10 scale monster trucks.
|
2-Speed
 |
|
Compact 2-speed transmission fitted with a hook style clutch guarantees secure and stable gear changing. Features metal
spur gear for heightened durability. Slipper clutch protects gears from shocks and can be adjusted by tightening nut. |
4WD
 |
|
Shaft driven 4WD chassis transmits engine power from transmission located in the middle of chassis to front and rear wheels via metal drive shafts. Ball pivot type four wheel double wishbone suspension and large capacity oil dampers ensure unbeatable off-road performance. |
Fail-Safe
 |
|
Lightweight and compact receiver equipped with fail safe device. The device prevents out of control driving caused by radio interference or low battery power by returning throttle servo to neutral or Brakes |
High Torque Servo
 |
|
The compact yet high-torque steering servo accurately guides the 148mm large diameter wheels. It provides sharp steering response. |
Full Ball Bearings
 |
|
A total 26 pcs. of ball bearings are employed from wheel axles to propeller shafts in gearboxes. Bearings minimize friction loss, ensure smooth movement and extend life of rotating parts. |
Adspec GP 2-channel transmitter
 |
|
Wheel/trigger type transmitter included. Simply turn the wheel for steering, pull/push the trigger for acceleration and braking. |
Electric Handy Starter Included
 |
|
Engine can be started without removing body Set plug heater into the engine and insert starter into gear unit. Engine can be easily started by pushing button.
*7.2V and C alkaline batteries are sold separately.. |
High Powered 5.2cc FR-32FX Engine
 |
|
The rugged and road-eating TNX 5.2R comes with a Tamiya FR-32FX engine featuring large diameter slide carburetor, 14mm crank shaft, lightweight piston and large heat sink head. The monster size engine features 5.2cc displacement and provides enormous power and blistering fast top speeds that are certain to demolish the competition! |
Receiver Fail-Safe Setup
PDF's
 |
|
Standard Manual (Link on top of page)
Maintenance Manual PDF (2.8M) |
Movies
|
|
|
 Download Video (High Speed Connection)
WMV 640x480 pixel 1min 13sec. (16.12MB)
Download Video (High Speed Connection)
MPG 640x480 pixel 1min 13sec.
(4.18MB)
*After saving the video to disk, you can play it using either Windows Media
Player or Quick Time Player |
|
Download Video (High Speed Connection)
WMV 640x480 pixel 18sec. (13.04MB)
*After saving the video to disk, you can play it using either Windows Media
Player or Quick Time Player |
|
Download Video (High Speed Connection)
WMV 640x480 pixel 18sec. (20.13MB)
*After saving the video to disk, you can play it using either Windows Media
Player or Quick Time Player |
|
Download Video (High Speed Connection)
WMV 640x480 pixel 18sec. (2MB)
*After saving the video to disk, you can play it using either Windows Media
Player or Quick Time Player
|
|
Download Video (High Speed Connection)
WMV 640x480 pixel 18sec. (20.63MB)
*After saving the video to disk, you can play it using either Windows Media
Player or Quick Time Player |
|
Download Video (High Speed Connection)
WMV 640x480 pixel 18sec. (32.25MB)
*After saving the video to disk, you can play it using either Windows Media
Player or Quick Time Player |
|
|
|
|
About the model
- 1/8 Ready-To-Run R/C Glow Engine Monster Truck on a shaft driven 4WD TGM-04 Chassis.
- Lightweight and compact TRU-03 Receiver features failsafe function to prevent runaway driving
caused by radio interference or low battery power.
- Comes with external electric Tamiya Handy Starter with drive gear unit and plug heater.
- Wheel/trigger type transmitter included.
- Features newly developed high-density, oval spike tires and dish wheels.
- Ball pivot type 4 wheel double wishbone suspension features 4 large capacity oil dampers.
- Features 2-speed transmission with metal spur gear and slipper clutch for heightened durability.
- Powerful 5.2cc (.32 cubic inch) FR-32FX engine with slide valve carburetor.
- A total of 26 ball bearings used to ensure smooth and efficient movement.
- Reinforced steel drive shafts.
- AA & C Batteries, engine fuel are separately required to operate truck.
- Tune-up truck with Tamiya Option Parts. Add separately available oil dampers and springs to attach a total of 8 dampers. Other option parts such as brake arm & disc, suspension mount & hex
wheel hub will further upgrade and improve performance.
RTR NITRO XB KITS REQUIRE:
(unless stated differently above)
|
|
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
