|
The Ford Bronco is a famous American 4X4 off-road vehicle. This 1970's model was among the first series called "Early Bronco" which were produced during 1965-1977. Three types of bodies were released; the fully-open "Roadster," the single cabin pick-up "Utility," and the "Wagon" which had a resin roof. The body featured triangular protrusions on both sides on the curved front hood which worked well as a guide for drivers to accurately measure the body size while driving. The front suspension features coil springs combined with the rigid axle, which was a first for mass-produced 4X4 vehicles and works well both on-road and off-road. The Bronco is still greatly popular around the world, particularly in America, where many are used as cross-country and rock crawling vehicles.
To heighten realism and night runs you can add front and rear LED's easily
| With the addition of our TLU-01 adding LED's to most vehicles is effortless. |
|
 |
 |
|
On the Bronco's body you will find the typical detail you expect from Tamiya. With raised details, like door Hinges and marker lights to the rear ford tailgate letters.
Included are newly designed metal plated H Parts (Grille, side mirrors and light covers) made from durable ABS resin. |
 |
|
 |
|
About the model:
- This is a 1/10 scale R/C assembly kit model of the Ford Bronco 1973.
- Comes on the excellent CR-01 crawling chassis.
- The newly designed polycarbonate body captures the Bronco's classic form.
- Newly designed metal plated H parts (Grille, side mirrors, and light covers) are made of durable ABS resin.
- The Bronco comes equipped with CR-01 Cliff Crawler Tires (Item 54117).
- Type 540 motor included.
- A wide range of Hop Up parts are available for you to further customize your machine.
Specs
- Full Ball Bearings
- Planetary gearbox comes with20T pinion gear for a 40.5:1 gear ratio
- Requires ESC and 2ch Radio w/1 servo
- Requires Paint and Assembly
Do not use the TEU-101BK (Item# 45029) with CR-01 Crawlers. The 101BK will overheat easily with the rigors of crawling. We'd recommend the TEU-302BK (Item# 45028) for use with the CR-01
ELECTRIC KITS REQUIRE:
(unless stated differently above)
|
Do you ship to my country?
)
)
)
)
)
)
)
)
)
)
)
)
)
)
