Item# 84205

Rc Tb03Vds Chassis Kit

Tb03Vds Drift Spec

MSRP: $724.00
Find spare parts Find upgrade parts

Based on the shaft-driven TB-03 chassis, this drift-spec chassis incorporates a 2.5mm thick carbon lower deck, aluminum gearbox braces to hold front/rear gearboxes, ... Learn more

Rc Tb03Vds Chassis Kit

  1. Description

    Based on the shaft-driven TB-03 chassis, this drift-spec chassis incorporates a 2.5mm thick carbon lower deck, aluminum gearbox braces to hold front/rear gearboxes, and a distinctive aluminum center brace to provide rigidity toward chassis pitch. The well-balanced layout has the two-piece propeller shaft along the center of the chassis with the battery pack and R/C unit positioned at chassis sides. The chassis also comes equipped with high-spec parts such as knuckle extensions, parallel steering link, and rear direct coupling to offer an exciting drift experience.

    Included Special Parts:
    ●Aluminum Center Brace ●Aluminum Gearbox Brace ●TRF Dampers (Hard Black Coated) ●F/R Assembly Universal Shafts ●Rear 42mm Lightweight Swing Shafts ●Short Reversible Suspension Arms ●Aluminum Motor Mount ●Aluminum Turnbuckle Shafts ●Hi-Torque Servo Saver ●2mm thick Carbon Battery Holder ●Full Ball Bearings

    53842 TA05 Stabilizer Set (F & R)
    54098 TB-03 Carbon Reinforced A Parts (Gear Case)
    54122 TB-03 Carbon Damper Stay (Rear)
    54124 TB-03D Carbon Damper Stay (Front)
    54137 TB-03D Aluminum Rear Upright (1 degree)
    54146 TB-03 Aluminum Damper Stay Mount
    54064-74 TB-03 Aluminum Suspension Mounts
    54171-75 TA05 ver.II Separated Suspension Mounts

    ●Length: 369mm ●Wheelbase: 257mm ●2.5mm thick Carbon Lower Deck ●Front-Mounted Motor Shaft-Driven 4WD ●Front Ball Differential & Rear Direct Coupling ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●TRF Dampers ●Gear Ratio=7.55:1 - 5.44:1 ●Full Ball Bearings on Drivetrain ●Motor sold separately ●ESC sold separately

    Parts Description
  2. Specifications

    • Adjustable Gear Ratio Yes
    • Bearings Shielded ball bearing
    • Chassis Material carbon fiber plate
    • Chassis Type TB-03 VDS
    • Construction Type Assembly Kit
    • Differential Type direct coupling (spool) & ball differential
    • Drive Type 4WD
    • Led Light Buckets no
    • Requires A 2-channel radio unit with servo and ESC, Battery pack & charger, body, motor, wheel, tires, and pinion gear
    • Scale 1/10
    • Shock Damper Oil-filled damper
    • Special Feature 1 2.5mm thick carbon fiber lower deck
    • Special Feature 10 Steel diff joints for improved wear and durability
    • Special Feature 2 Aluminum center F/R gearbox braces which offer superior chassis strength
    • Special Feature 3 Chassis layout is optimized for drifting and features a 2-piece propeller shaft along the center line of the chassis with the battery pack, motor and R/C radio gear positioned on either side of the car
    • Special Feature 4 4-wheel double wishbone suspension is equipped with the short reversible suspension arms as seen on the TB-03, TA-05 Version 2 and TRF 416,417
    • Special Feature 5 TRF (Tamiya Racing Factory) Aluminum threaded shock body and Flourine piston dampers included
    • Special Feature 6 A parallel geometry steering system with left and right symmetrical steering angles offers excellent control and easier counter steering maneuvers
    • Special Feature 7 2-piece universal propeller shaft
    • Special Feature 8 Aluminum turnbuckle shafts
    • Special Feature 9 Aluminum hex wheel hubs
    • Suspension 4-wheel fully independent double wishbone
    • Terrain Use On-Road
Close