Rc Porsche 911 Gt3R Cup "Vip"
-
Description
This is one of the powerful GT cars that competed in the pre-race of the European F-1 circuit, the Porsche Super Cup. The car"s sleek outer appearance, with front air dam and aerodynamic rear wing, hint at the force that lies within- the 3.6 liter 6 cylinder horizontally opposed engine with 360 horse power of output. Internally and externally, this car was made with one thing in mind...racing.
- 53467 - TL-01 & FF02 Long suspension arm set
- 53440 - On-road tuned hard spring set
- 53418 - TL-01 Universal shaft (2pc.)
- 53347 - 3x3mm spring set screws (10pc.)
- 53346 - TL-01/M03 quick release battery holder
- 53345 - TL-01/M03 toe-in rear upright
- 53342 - TL-01 speed-tuned gear set
- 53333 - Touring car tuned spring set (short)
- 53324 - TL-01 stabilizer set
- 53323 - TL-01 carbon propeller shaft
- 53322 - TL-01 hollow carbon gear shaft
- 53303 - TL-01 adjustable upper arm set
- 53301 - TL-01 stainless steel suspension shaft set
- 53300 - TL-01 turnbuckle tie-rod set
- 53295 - Tire inner foam
- 53292 - TL-01 ball bearing set
- 53280 - TA03 super low friction damper set (4pc.)
- 53267 - TA03 ball differential
- 53163 - On-road tuned spring set
- 53162 - 4mm anodized aluminum flanged lock nuts (black)
- 53161 - 4mm anodized aluminum flanged lock nuts (gold)
- 53160 - 4mm anodized aluminum flanged lock nuts (red)
- 53159 - 4mm anodized aluminum flanged lock nuts (blue)
- 53144 - Touring & rally car bushing & ball connector set
- 53141 - 4WD touring & rally car lightweight king pins
- 53095 - 3x10mm titanium tapping screw (10pc.)
- 53056 - Pin type wheel adapter
- 50357 - 22T, 23T AV pinion gear set (only the 23T gear in this set is compatible with the TL-01)
- 50356 - 20T, 21T AV pinion gear set (only the 21T gear is compatible with the TL-01)
This R/C car employs the highly reliable 4WD TL-01 chassis. The lightweight, high-durability monocoque frame uses double-wishbone 4-wheel suspension. Superb weight distribution enables excellent handling. - 53467 - TL-01 & FF02 Long suspension arm set
-
Specifications
- Adjustable Gear Ratio yes
- Bearings metal and plastic bushings
- Body Material Clear Polycarbonate
- Chassis Material plastic
- Construction Type assembly kit
- Differential Type gear
- Discontinued True
- Drive Type shaft
- Led Light Buckets no
- Led Lights no
- Motor 540-brushed type
- Required To Complete 7.2 battery & charger
- Scale 1/10
- Shock Damper friction damper
- Special Feature 1 Chassis Type: TL-01
- Special Feature 10 Tire width F/R: both 27mm
- Special Feature 2 Length: 18.27 inches (464mm)
- Special Feature 3 Width: 7.48 inches (190mm)
- Special Feature 4 Wheelbase: 10.12 inches (257mm)
- Special Feature 5 Front Tread: 6.14 inches (156mm)
- Special Feature 6 Rear Tread: 6.38 inches (162mm)
- Special Feature 7 Weight: 3.48 lbs. (1580g)
- Special Feature 8 Gear Ratio: 7.96:1
- Special Feature 9 Tire diameter F/R: both 64mm
- Suspension fully independent double wishbone
- Terrain Use on-road