Rc Ta05-Vdf
-
Description
The TA05-VDF is specially designed for top-level drifting. The Vertical Double Frame features two 2mm thick carbon plates which help resist chassis pitch while also enabling supple roll movement during drifting. Based on the TA-05's proven belt-driven 4WD system, its drivetrain features a front ball differential, rear direct coupling (spool), and F/R universal shafts. A parallel geometry steering system with left and right symmetrical steering angles offers excellent control of counter steering.
Main Specifications
●2mm thick Carbon Lower Deck ●2mm thick Carbon Vertical Double Frame ●Front Ball Differential ●Rear Direct Coupling ●TRF Special Dampers (Hard Black Coating) ●F/R Universal Shafts ●46mm Lightweight Rear Swing Shafts ●Short Reversible Suspension Arms ●4mm thick Clamp Type Aluminum Wheel Hubs
●Aluminum Turnbuckle Shafts ●High-Torque Servo Saver (Black) ●Full Ball Bearings
Specifications
●Chassis Length: 366mm, Width: 188mm ●Wheelbase: 257mm ●Tread (F/R): 168mm ●2mm thick carbon Vertical Double Frame + 2mm thick Carbon Lower Deck ●Horizontally-Placed Motor 2-Belt Driven 4WD
●Diff Gear＝F: Ball Differential, R: Direct Coupling ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●TRF Dampers ●Gear Ratio＝4.39-8.53:1 ●Full Ball Bearings ●Requires Electronic Speed Controller (separately available)
REQUIRES: 2-channel radio, steering servo, ESC, motor, 7.2-7.4 volt battery with compatible charger, wheels with drift spec tires, and 190mm sports car body set.
-
Specifications
- Adjustable Gear Ratio Yes
- Bearings Shielded ball bearing
- Chassis Material Carbon fiber plate
- Chassis Type TA-05VDF
- Construction Type Assembly kit
- Differential Type Direct coupling (spool) & ball differential
- Discontinued True
- Drive Type 4WD
- Electronic Speed Control (esc) Not Included
- Led Light Buckets no
- Motor Not included
- Required To Complete 2-channel radio, steering servo, ESC, motor, 7.2-7.4 volt battery with compatible charger, wheels with drift spec tires, and 190mm sports car body set.
- Scale 1/10
- Shock Damper Oil-filled damper
- Special Feature 2 Front: Ball Diff., Rear: Spool Diff
- Special Feature 3 Carbon chassis 2mm thick
- Special Feature 4 Aluminum hex hubs
- Special Feature 5 TRF Dampers (Case: Fluorine Coated, Shaft coating: Normal)
- Special Feature 6 Short reversible suspension arms
- Special Feature 7 Uprights feature 1050 ball bearing specifications
- Suspension 4-wheel fully independent suspension
- Terrain Use On-road