Item# 58681

Rc Formula E Gen2 Car

Tc-01 Championship Livery

MSRP: $379.00
Find your local Hobby Store or Request Availability Notification

Thank you! You will receive an email when this item is back in stock!

Find spare parts Find upgrade parts

This R/C model assembly kit recreates the GEN2 race car that is used in the Formula E world championship, the pinnacle of electric car racing. The sleek, high-tech ... Learn more

Rc Formula E Gen2 Car

  1. Description

    This R/C model assembly kit recreates the GEN2 race car that is used in the Formula E world championship, the pinnacle of electric car racing. The sleek, high-tech body with arch covered wheels is recreated in polycarbonate. Halo, mirrors and rear diffuser/bumper are separately molded components. Markings are included to recreate the Championship Livery car, and the model is based upon the shaft-driven 4WD of the TC-01 chassis.

    TC-01: Seriously Low-Profile
    This durable composite monocoque-frame chassis provides shaft driven 4WD from a central motor via front and rear propeller shafts, with oil filled gear differentials. 4-wheel independent double wishbone suspension employs long arms, plus inboard setups front and rear with oil shock-dampers actuated by push rods and rocker arms to allow the use of low-profile bodies. Adjust spacer width to easily alter camber, skid and toe angle settings. Both suspension arms and uprights are identical left, right, front and rear, for more efficient maintenance and pit work.

    • 1/10 scale RC assembly kit.
    • Length: 430mm, Width: 188mm, Height: 99mm
    • Wheelbase: 257mm
    • Tire Width/Diameter: 24/64mm (Front & Rear)
    • Composite Monocoque-Frame Chassis
    • Shaft-Driven 4WD
    • Front & Rear Oil-Filled Gear Differentials
    • 3-Piece Steering Tie-Rod
    • Front & Rear Inboard 4-Wheel Independent Double Wishbone Suspension
    • CVA Oil Dampers (Front & Rear)
    • Gear Ratio = 6.56:1 (with kit 24T pinion)
    • Use of different spacers allows alteration of camber, caster and toe angles for maximum freedom of setup.
    • Change bumpers and body mounts to switch between formula and touring car layouts.
    • The shaft-driven 4WD layout uses TB-05 design oil-filled gear differentials for smooth, efficient drive performance.
    • Polycarbonate body
    • Halo and mirror components are molded in white ABS.
    • In addition to the unique Formula E Gen2 body, this chassis is compatible with standard touring car measurement bodies. Wheelbase: 257mm.
    • Stickers are included to recreate the championship car livery.
    • Compatible with IFMAR standard “square-shape” dimension battery packs.
    • Required to complete: 2-channel radio, steering servo, ESC, 7.2-7.4volt battery pack with compatible charge, and Tamiya PS paint for polycarbonate arts and Tamiya TS paint for ABS plastic parts.

    TC-01 Blank Setting Sheet: Keep your track settings organized with the TAMIYA car setting sheet. Simply print and fill out or save it to your computer and fill in your settings digitally. Download TC-01 Setting Sheet Blank

    Learn more about the Full-Size FIA FORMULA E SERIES

    Parts Description
  2. Specifications

    • Adjustable Gear Ratio Yes
    • Bearings Includes full ball bearings
    • Body Material Polycarbonate
    • Body Stickers Included
    • Chassis Material FRP Fiberglass Reinforced Plastic
    • Chassis Type TC-01
    • Construction Type Assembly Kit
    • Differential Type Gear-Type (Oil-Filled)
    • Drive Type 4WD
    • Electronic Speed Control (esc) Sold Separately
    • Requires A 2-channel radio, steering servo, ESC, 540-size motor, 7.2-7.4volt battery & compatible battery charger, and Tamiya PS paint.
    • Scale 1/10
    • Shock Damper CVA Oil Filled
    • Special Feature 1 NOTE: Battery thickness may not exceed 26mm
    • Suspension Fully Independent Double Wishbone
    • Terrain Use On-Road
Close