1/10 Gp Tg10-Mk.1 Chassis Kit
-
Description
This value packed kit is ideally suited for serious racers. The kit uses the TG10 chassis as a base, and adds ball bearings, super low friction dampers, a lightweight flywheel, a carbon upper deck, a special lower deck and several other competitive features.
Adopts shaft drive 4WD system for winning control
- Adopts shaft drive 4WD system for winning control
- Lightweight and durable chassis consists of 3mm thick perforated duralumin lower deck and 2mm thick carbon upper deck.
- Full bearings and universal shaft enable highly efficient running.
- 4-wheel double wishbone suspension features shock absorbing low friction dampers and stabilizer for steady cornering.
- Aluminum engine mount cools engine and heightens attachment durability.
- Lightweight flywheel gives rise to sharp acceleration.
- 1/10 body for any kind of 4WD Touring Car (excluding those with short wheel bases).
- 2-channel R/C system for engine cars & batteries.
- Tamiya FS-12LT Engine
- TG Fuel and Tamiya Rev Top Fuel
- "Power Champ HP" 1.5V Alkaline booster battery, plug cable/clip, and fuel filler.
- Chassis Type: TG10-Mk.1 PRO
- Scale: 1/10
- Overall Length: 435mm
- Overall Width: 194mm
- Overall Height: 122mm
- Minimum Clearance: 14mm
- Weight Fully Equipped: 1548g (not including fuel)
- Wheelbase: 257mm
- Tread (F/R): 155mm/164mm
- Chassis Material: 3.0t duralumin +carbon fiber
- Chassis Type: double deck
- Steering Tie-Rod: three parts
- Suspension F/R: double wishbone
- Caster Angle: F/R: 10/0 Camber angle: adjustable
- Toe angle F/R: adjustable/2
- Dampers F/R: super low friction dampers
- Drive System: shaft drive full time 4WD
- Gear Ratio: 8.1:1
- Diff. Gear System F/R: bevel diff
- Brake: disk
- Tire Width/Diam F/R: 27/65
- Tread Pattern: F/R racing slicks
- Tire Material: synthetic rubber
- TG10 Racing Chassis
- TG10 Carbon Upper Deck Set
- TA03 Super Low Friction Dampers (Silver)
- TG10 Urethane Bumper
- TG10 Stabilizer Set
- Skyline GT-R Universal Shaft Set
- Aluminum Engine Mount for TGX
- Lightweight Flywheel
- TR15T High Grade Brake Disk
- High Torque Servo Saver Set
- Aluminum 5mm Ball Connector
- Adopts shaft drive 4WD system for winning control
-
Specifications
- Adjustable Gear Ratio fixed
- Bearings shielded ball bearing
- Body Material Polycarbonate
- Chassis Material aluminum
- Construction Type assembly kit
- Differential Type gear
- Discontinued True
- Drive Type shaft
- Led Light Buckets no
- Led Lights no
- Motor Nitro glow engine
- Required To Complete 2-channel radio gear
- Scale 1/10
- Shock Damper oil-filled damper
- Special Feature 1 Chassis Type: TG10-Mk.1 PRO
- Special Feature 10 Brake: disk
- Special Feature 2 Overall Length: 435mm
- Special Feature 3 Overall Width: 194mm
- Special Feature 4 Overall Height: 122mm
- Special Feature 5 Weight Fully Equipped: 1548g (not including fuel)
- Special Feature 6 Wheelbase: 257mm
- Special Feature 7 Tread (F/R): 155mm/164mm
- Special Feature 8 Chassis Material: 3.0t duralumin +carbon fiber
- Special Feature 9 Gear Ratio: 8.1:1
- Suspension fully independent double wishbone
- Terrain Use on-road